top of page

5.0-5.8GHz 1W 300Mbps 2T2R MIMO Wi-Fi booster SH58Gi1000D2P

Specifications

Booster Model: SH58Gi1000-D2
Operating range : 5000~5875MHz
Channel width: 20Mhz&40Mhz&80Mhz
Supported standards: IEEE 802.11a/n, 2Tx2R
Operation mode: Bi-directional, half-duplex, time division duplex, MIMO
Connector type: To radio SMA female (hole inside). To antenna RP-SMA female (pin inside)
Output power: 1000mW (30dBm)
Input power: 0 ~ 20dBm
Transmit gain: 12 ~ 14dB
Receiver gain: 9 ~ 11dB
Noise figure: ≤3.5dB typical
Frequency response: ±1dB over operating range
Power adapter: 12V/2A DC, 100~240V
Operating temperature: -20°C to +70°C
Operating humidity: Up to 90% relative humidity
Material: Cast aluminum
LED light: Power status LED and activity status LED
Booster weight: 178g (6.28oz)
Booster size: 8.5 x 7 x 2cm (3.3 x 2.8 x 0.8in)
 
 

SKU: 0305SH100312

Model: SH58Gi1000D2P

P/N: 58Gi1000D2014

Barcode: 6958917601213

Kit Includes

1 x SH58Gi1000-D2 Wi-Fi booster
2 x RG316 cables with SMA connectors (20cm)
2 x 6dBi omni antennas
1 x power supply
1 x user manual

Antenna

Compliant: 802.11a/n
Frequency Range: 5100-5850MHz
Bandwidth: 750MHz
Gain: 6dBi
VSWR: ≤1.8
Polarization: Vertical
Impedance: 50Ω
Max power: 50W
Lightning protection: DC ground
Connection: RP SMA
Product Size: Φ1.35*20.5cm (Φ0.53*8.07in)
Product Weight: 30g (1oz)
Color: black

ACoaxial cable

Cable Type: RG316 Coaxial cable pigtail
Length: 20cm (7.87in)
Impedance: 50Ω
Connectors: SMA male to RP-SMA male

Recommended Applications

Our Wi-Fi boosters is designed for use in mobile and/or mesh wireless networking applications. Designed for bi-directional signal amplification, In contrast, traditional analog amplifier technologies can go into saturation or reduce transmit power as input signal fluctuates, negatively impacting signal quality and network performance. This booster can be used any 5GHz antenna that implements an SMA-Male connector. Small footprint and low profile design make it an ideal solution for mounting on vehicles, drones, or in other space-constrained applications.
 
The 5.8GHz Wi-Fi booster efficiently increases signal reach of any antennas by up to 200%-400%.
 
Relevant 5.8GHz WiFi boosters are widely used to increase the power & the signal for different products, including:
- Routers
- Access points
- IP cameras and surveillance system
- Video senders
- Professional video cameras
- RC UAV, helicopters, planes and vehicles
 

Important Notes About Use

Do not use the Wi-Fi booster near fuels or chemicals. Keep the device away from children.
Wi-Fi Boosters may affect the normal operation of electronic medical devices such as pacemakers, hearing aids and other electronic medical hearing equipment.
Privately disassemble the device without permission is prohibited. Keep the device dry. Rain, humidity and all types of liquids or moisture can contain minerals that corrode electronic circuits. If your device gets wet, contact the supplier.
Do not use a wet towel or detergent to clean the device.
Dispose of the device according to local regulations, please recycle when possible. Do not dispose of it as household waste.

Packaging Details

Unit Type:set

 

Package Weight: 420g (14.8oz)
Package Size:21.3cmx13.5cmx5cm (8.4inx5.3inx2in)

Shipping Ways

We support shipment via DHL, Fedex, UPS, Aramex, EMS, China Post, Hongkong Post, PostNL, etc.

 

You can choose the right shipping way.

Our Service

Default lead time: within 2~3 working days
One-year warranty
One stop service
OEM & ODM are also welcome

bottom of page