5.8G Wi-Fi Booster SHRC58G2WP

Picture 1 of 5.8GHz 2W UAV booster

Picture 1 of 5.8GHz 2W UAV booster RC58G2W

Picture 2 of 5.8GHz 2W UAV booster

Picture 2 of 5.8GHz 2W UAV booster RC58G2W

External packaging of 5.8G 2W Booste

Picture 7 of original external packaging of 5.8GHz 2W UAV WiFi Booster RC58G2W

Picture 1 of 5.8GHz 2W UAV booster

Picture 1 of 5.8GHz 2W UAV booster RC58G2W

1/7

Specifications

Operating range: 5.0~5.875GHz.

Operating mode: Bi-directional, half-duplex, time division duplex senses RF, carrier fromtransmitter and automatically switch receiving to transmitting mode.

Antenna connector type: SMA female (hole inside) 50ohm.

Radio connector type: RP-SMA female (pin inside) 50ohm.

Input power: 0~20dBm.

Transmit gain: 15-18dB.

Output power: 2000mW (33dBm).

Receiver gain: ≤12dB.

Noise figure: ≤3.5 dB typical.

Frequency response: ±1dB over operating range.

Supported voltages: 5V~16V/2A DC.

Temperature:-20°C to + 70°C.
Operating humidity: Up to 75% relative humidity.
Material: Cast aluminum.
Booster Weight: 46g (1.62oz).
Booster Size: 7.3cmx4cmx1cm (2.9inx1.6inx0.4in).

SKU: 0305SH100318

Model: SH-RC58G2W

P/N: RC58G2W015

Barcode: 6958917601596

Kit Includes

1 x SH-RC58G2W eSunRc Wi-Fi booster
1 x RG141 20cm cable SMA male to RP-SMA male
1 x 1.13mm(D) 30cm cable IPEX to SMA male
1 x DC 2.5” to 12V 5.5” adapter
1 x DC 2.5” to USB adapter
1 x DC 2.5” to JST adapter
1 x Mounting Velcro
1 x User manual

Typical applications of this adapter: UAV RC, Monitoring camera or Wireless Router

Shipping Ways

We support shipment via DHL, Fedex, UPS, Aramex, EMS, China Post, Hongkong Post, PostNL, etc.

You can choose the right shipping way.

Packaging Details

Unit Type:set

Package Weight: 180g (6.35oz)
Package Size:11cmx8cmx4.6cm (4.4inx3.2inx1.8in)

Our Service

Default lead time: within 2~3 working days
One-year warranty
One stop service
OEM & ODM are also welcome

Recommended Applications

Wi-Fi booster of our company is designed for use in mobile or mesh wireless networking applications and for bi-directional signal amplification. In contrast, traditional analog amplifier technologies can go into saturation or reduce transmit power as input signal fluctuates, negatively impacting signal quality and network performance. Wi-Fi booster can be used with any 5.8GHz antennas that implement an SMA-Male connector. Small footprint. light weight and low profile design make it an ideal solution for mounting on UAV, vehicles or various other space-constrained applications.

This 5.8GHz Wi-Fi booster efficiently increases signal reach of any antenna by up to 200%-400%. Product has been used and is to increase the power and/or the signal for different products and applications, including:

- RC UAV, helicopters, planes and cars

- Routers

- Access points

- IP cameras

- Walkie talkies

- Smart home systems

- Hot Spot solutions

- Hospitals

- Hotels

- Supermarkets

Important Notes About Use

To install the booster, first we connect the antenna to the 'To antenna' connector, then we connect the radio to the “To radio” connector. After that, connect the power supply.

There are various kinds of radios that you can connect to the booster to increase the power and distance of use, including router, access point, radio control remotes, radio control planes, drones, cars, IP cameras, Walkie Talkies, etc. It's essential for user to check whether the ranges of frequency between the radio and the booster are the same.

This Wi-Fi booster includes 3 sorts of adapters to connect your booster to a DC battery or power bank. If you need to connect it to AC power supply(110V/220V) or other type of power source, please contact with us in advance by email info@shyskytech.com

Do not use the Wi-Fi booster near fuels or chemicals. Keep the device away from children.

Wi-Fi Boosters may affect the normal operation of electronic medical devices such as pacemakers, hearing aids and other electronic medical hearing equipment.

Privately disassemble the device without permission is prohibited.Keep the device dry. Rain, humidity and all types of liquids or moisture can contain minerals that corrode electronic circuits. If your device gets wet, contact the supplier.

Do not use a wet towel or detergent to clean the device.

Dispose of the device according to local regulations, please recycle when possible. Do not dispose of it as household waste.